How to Control Windows 10 With Your Voice | Laptop Mag.

Looking for:

Control your pc with your voice free -  

Click here to DOWNLOAD

   

 

Control your pc with your voice free -

 

Windows speech recognition is software that comes installed on most vista and 7 computers. It allows you to use your voice to control the computer and even dictate. It takes a bit of getting used to but it is a very fun program to use after you master the basics and learn how to write your own commands.

To start Speech recognition, open up the control panel. Click on the accessibility ease of access link and you should see the speech recognition options. The first thing you should do is set up your microphone. This only takes a few minutes.

Once your microphone is ready to go, I recommend that you do some speech training. This is important because it will help the software to understand your accent and the way you talk in general. The more that you do this, the better the program becomes at following your commands. Once you have done a little training, it is time to delve into the magical world of speech recognition!

Click on the first link in the speech recognition options panel to start the program. You will notice when the program first starts up that the button is grey and it is "sleeping". To have it start responding to you, either click on the grey button or say "start listening".

Well done, the computer is now ready to take commands! To get used to using speech recognition, start by opening a basic word processor like microsoft word. To do this, say "Open microsoft word" or whatever word program you wish to use. Try dictating a simple sentence like "Instructables is epic" and watch the computer convert your words to text on the screen.

This will get you used to speaking in a clear tone. There are many commands that you can use to control aspects of the computer and you can access a list by saying "What can I say? If you want to select a specific portion of the screen but there is no button or link, you can use a feature called mousegrid. When you say "Mousegrid" it will divide the screen into numbered sections. Say the numbers that correspond to the portion of the screen until you refine it enough, then say "OK" to instruct the computer to click in the centre of that square.

This is a useful tool if you are trying to click on a picture link such as the main logo of instructables that you can see in the top left of your screen. Once you think you are pretty good at controlling the computer by voice, you can have a go at macros. The software for writing these can be found at the microsoft website here When you open up the macro software, speech will automatically run.

Writing your own is easier than it looks, you just need to know a few basic executors. To open up the new macro window, click the button on the start bar that looks like a blue speech bubble with cogs in it. This offers 5 different ways to create macros. The insert text macro creator is the first option.

It is helpful for inserting text or phrases that you use often, like your address. For example, instead of typing out your whole address, you can say "insert my address". Firstly, write the phrase you want to say to cause the program to insert the text. In the second box, write the text to be inserted. Press "Next" and then "create". This can be fixed by creating a new signing certificate. Right click on the icon on the start bar and pick security, then create new signing certificate. These are important to protect your computer from any malicious macros that could cause harm to your computer.

In the first box, type the phrase you would like to use to open the program. In the second box, you need to type the location of the program. This must be an executable file but if you use the browse button, the program will filter out anything that you can't use. Most programs can be found in the C: drive in your Program Files folder. As before, pick next and create. Send keystrokes can imitate your keyboard keys so that you don't have to press a specific combination.

For example, instead of pressing Ctrl Alt Delete every time you want to go to the login screen, you can say something like "Main screen" As earlier, type the phrase, then the keystrokes. Pay attention to the example below the boxes as you will need to follow the conventions in order for your macro to work. A good idea for Send Keystrokes is the Print screen. Just sayin'. Emulate recognition is great for customising your computer.

For example instead of saying "Stop listening" you can use a macro that will cause the program to enter sleep mode when you say "Go to sleep". Keep in mind that you are unable to modify the "start listening" command. If you need to find the real commands for the second box, remember that you can open the speech dictionary by saying "What can I say?

This is where you can write your own macros from scratch. The basic executors you should know are EmulateRecognition Speak ListenFor These are the most useful for basic customisation. All executors must be in greater than or less than symbols and be between two command lines. An example is shown in the picture of how my computer named Magrathea can listen for a greeting and speak back. If you would like information on more advanced executors, this will help you out a lot as it is the whole documentation of the program.

Windows default speech recognition is not so accurate and is a pain to train. Braina is the best free alternative to control your computer with voice. Reply 5 years ago. Reply 7 years ago on Introduction.

Braina is NOT free. Even worse than paid software it is a subscription software. So no soup for you! It does look like cool SRS but do not care for their pricing structure at all. I just can't seem to justify paying monthly for voice rec ability on my PC. By Xenobia Follow. More by the author:. Did you make this project? Share it with us! I Made It! Reply Upvote. BharathG10 akashs1 Reply 5 years ago. RjL akashs1 Reply 7 years ago on Introduction. Cubit-GamesY 7 years ago on Step 9.

 

Control your pc with your voice free

 

Control your PC Computer using Free Voice and Speech Software An easy software solution to enable you to control your computer, dictate emails and letters, and have нажмите для продолжения computer read documents back to you.

SiteMap Other Resources. Advantages of Interacting With Computers Through Speech Hands Speech does not require use of physical devices such as keyboards or pointing devices. Computing devices can become more compact as keyboard and mouse pointing devices take a less prominent role. Individuals with physical yoour may also benefit from the use of voce based applications.

Eyes Does not require the use of vision. Speech can be performed effectively in low light environments or by persons with low or no vision. Applications for this technology may include uses where the individual needs to keep their eyes on equipment or the environment if navigating a vehicle. History People have been speaking for thousands of years and individuals start speaking at a young control your pc with your voice free.

Distance Speech systems can process control your pc with your voice free from individuals that may be at some distance away from the computer.

Smaller Wireless and handheld devices are becoming increasingly smaller with corresponding smaller displays and input keys. A voice interface is not constrained by the physical size of the device. What is Speech Recognition? Speech Recognition is a technology that allows the computer to identify and understand gour spoken by a person using a microphone or telephone.

Computer software that understands your speech enables /11698.txt to free conversations with the computer. These conversations would include you and the computer yiur as commands or in response to events, input, or other feedback. По этому адресу is easier and more intuitive than selecting buttons and menu items. Human speech has evolved over many thousands of years to become an efficient method of voicw information and giving instructions.

Useful when accessing systems through pay telephones that withh not control your pc with your voice free attached keyboards. Command and control your Window's computer перейти на источник your voice.

Operate your computer tour a minimum of keystrokes or mouse clicks. If you want to move oyur cursor down one line, simply say: Down One. Want to check your emails? Simply say: Open Email. Add control your pc with your voice free to open and control any Window's document or program. How Does It Work? NET Frameworkwe have developed a very small and efficient voice command and recognition application. SAPI and. NET are both required to use this software.

Dictation as Well? Voice Dictation is integrated into the e-Speaking application including 26 different Dictation Voice Commands. Why e-Speaking? Our intent in developing this product was to supplement your ability to command and control your computer through your voice.

And to allow the computer to read documents and emails to you. How Expensive is It? It's Free to download and try it for days! Users Guide? Access the on-line user's guide.